Diaphragm coupling bolt installation process

Manufacturers in the diaphragm coupling design has been constantly innovative learning, to provide you with equipment in structure and configuration are novel and high-quality mode, in order to meet your needs, we can according to your drawings for you to create a non-specification coupling, so that you can provide convenience in the purchase.

The methods we need to pay attention to when installing diaphragm coupling bolts are as follows:

1, bolt is an important core component of diaphragm coupling, its installation is correct or not directly affects the performance of the product life and safety, otherwise it will cause a waste of manpower and parts. Therefore, the correct installation of the diaphragm coupling bolt direction is a key link, and do not remember to install and drop a small part including the spring washer, in order to make the bolt assembly play its excellent performance, will not make the diaphragm coupling other parts damaged;

2. Diaphragm coupling bolt fitting section and flange hole fitting section clearance, generally according to the bolt diameter of 0.20mm ~ 0.30mm, this fitting section plays a very key role in transferring torque, if the clearance is replaced. The diameter gap between the inner hole and the bolt between the buffer sleeve and the diaphragm rivet is 0.5mm ~ 0.7mm, which plays the role of pressing and positioning the diaphragm. If the diaphragm coupling bolt direction installation Kai easy to cause the bolt skew, and the diaphragm will therefore distort deformation;

3. Correct installation of diaphragm coupling bolts: The bolt is pierced from the outer side of the flange hole, and then into the diaphragm hole (pay attention to the direction of the diaphragm, the diaphragm is made up of many single sheets by rivet and rivet washer, the rivet washer should be in contact with the buffer sleeve, otherwise it will affect the service life of the rivet group), and then from the other flange hole outside the buffer sleeve, elastic washer, Pay attention to the direction of the bolt when installing the bolt. Do not install the direction of the bolt randomly. Otherwise, the diaphragm will be distorted. Because the surface of bolt and flange mating section is a very important mating section for transferring torque, the surface integrity directly affects the service performance;

Through the above for the diaphragm coupling in the installation process need to pay attention to the matters of the detailed introduction hope to help you, in addition to the production design of the coupling besides our main products are: flange coupling, drum gear coupling, rigid flange coupling, stainless steel clamp shell coupling, diaphragm coupling, tire coupling and so on.