Analysis of selection factors for WG type drum gear coupling

Introduction:

Speaking of WG type drum gear coupling, it must be known by the machinery manufacturers what it is used for. This coupling is used to connect the transmission parts in some mechanical equipment. This is an important part of machinery that transfers torque by the joint rotation of two shafts, one is the drive shaft and the other is the rotation shaft. In the high-speed and heavy-duty power transmission, some couplings play the role of buffering, damping and improving the dynamic performance of shafting.

Analysis on Selection factors of WG Type Drum Gear Coupling:

At present, it seems that the manufacturers of coupling are constantly increasing, so you can see a wide variety of Warg-type drum gear coupling in the market. In the process of production, it is divided into many forms, according to the relative position and position changes of the two connected shafts :(1) fixed coupling, It is mainly used for the ground force which requires strict alignment of two axes and occurs relative displacement in small and medium size. The structure is generally simple, easy to manufacture, and the instantaneous speed of two axes is the same. (2) Removable couplings are mainly used for soils with inclined or relative displacement from two axes. They can be classified into rigid removable couplings and elastic removable couplings according to the method of force used to compensate displacement. Rigid removable couplings compensate by the degree of motion of one or more forces in the dynamic connection between the coupling parts. For example, tooth couplings allow axial displacement; word grooved couplings (used to join two shafts with small parallel or angular displacement); universal couplings (used when the two shafts have larger angles or at different angles). In the upper work, there is a more angular displacement of the earth), the gear coupling (allows comprehensive displacement), the chain coupling allows radial displacement), etc. Elastic movable coupling (referred to as elastic coupling) uses elastic deformation of elastic components to compensate the deflection and displacement of the two shafts, and elastic components also have buffering and damping properties, such as snake spring coupling, radial multilayer plate spring coupling, elastic ring pin coupling, nylon pin coupling, rubber sleeve coupling, etc.

To sum up:

As you can see now, WG drum gear coupling has begun to be standardized in production, you should select the appropriate type according to the working requirements of the mechanical equipment in advance, then calculate the torque and speed according to the diameter of the shaft, then check the applicable model from the relevant manual, and check the production of some key parts.