Installation process of elastic pin coupling manufacturers

Introduce:

The material of the elastic original pin of the elastic pin coupling is generally nylon, which has the ability to compensate for the offset of the two axes in a small amount. The elastic part is sheared during work, and the work reliability is extremely poor. It is only suitable for medium-speed transmission with very low requirements. Shafting is not suitable for working conditions that require high reliability.

Installation of elastic pin coupling:

     1. Put the outer ring on the half-coupling and install the appropriate baffle on the flange of the half-coupling, and fix the outer ring and the half-coupling with screws.

     2. Fill the nylon rod into the hole between the outer ring and the coupling half.

     3. Install the other coupling half in the outer ring.

     4. Install another nylon rod into the hole of the outer ring and the coupling half.

     5. Finally, fix the other baffle with the outer ring of the coupling with screws.

Summarize:

Through the above steps, we understand the assembly process of the elastic pin coupling. Its function is to transmit torque by cutting the longitudinal section of the nylon rod during work, which can partially replace the gear coupling. Elastic column The structure of the pin coupling is more complicated than that of the elastic sleeve pin coupling and the elastic pin coupling, and its assembly process is also more complicated than them. Let's take a look at this process.