The difference between universal coupling and flat plate

The difference between universal coupling and flat plate

The beginning of grinding should be small strength push pull, universal coupling is the common characteristic of the angular compensation is large, different structure types of universal coupling two axes Angle is not the same, generally ≤5°-45° between. The universal coupling makes use of the characteristics of its mechanism, so that the two axes are not in the same axis, the presence of axis Angle can realize the continuous rotation of the connected two axes, and reliably transfer torque and motion. Universal coupling is characterized by large angular compensation capacity, compact structure, high transmission efficiency. Diaphragm coupling manufacturer

To prevent the oil and sand from being squeezed out between the plates. The movement track of the board is "8" word movement, as far as possible to catch the oil between the platform, feel the push and pull of both hands should be the same. When comparing lubrication, the speed of rotating push and pull on the plate should be increased at this time. A stroke is about 4~5 seconds, and the stroke distance should be more than half of the size of the platform, and the swing is increased. Over time, the attraction between the two increased, and it was very even. When the cast iron platform moves, the sand itself moves and rolls. While cutting the platform, it is embedded in the platform, and is extruded by other sand, squeezing each other. When the push and pull force reaches about 500N, the sand is embedded firmly, and the sand pressing can be completed.

The grinding platform in the grinding process, but also often pay attention to make the grinding plate everywhere uniform wear. Listen to the sound of grinding sand, whether with the movement of the board and issued a "rustling" metal sound, can not have a pause or unusual sound; Look at whether the oil is evenly spread between the boards. Push pull platform is always in the "8" word operation. When pulling the platform, be careful not to lift the plate up with your hands. Both hands must be evenly forced, the speed must be stable, walk a few strokes to turn the plate 90°. When turning the plate and connecting the "8" movement, it must be connected, smooth and excessive, and try not to have a pause. The speed of the push and pull decreases as the attraction between the plates increases.