What are the causes of cardan shaft vibration?

In the use of cardan shaft will sometimes produce a certain vibration because of shaking, in order to help you better understand the cause of vibration to help you better use, let's take a look at the causes of cardan shaft vibration are what.

What are the causes of cardan shaft vibration?

1, the balance block or component of the cardan shaft unbalance compensation.

2, the assembly of the two cardan axis direction is not in the same plane.

3. When the universal joint is bent and the shaft tube is sunken into the drive shaft assembly, the mark does not tend to connect the shaft and shaft tube fork of the universal joint and spline shaft, which destroys the original balance.

4. The cardam flange coupling is loose, causing the position to be deflected.

5, the spline sleeve of the universal shaft is worn too much, or the gap is too large.

For the use of the cardan shaft, we should pay attention to certain ways and methods, so as to maximize the role of the cardan shaft. In order to effectively extend the service life of the cardan shaft, we should also carry out certain maintenance during the use of the cardan shaft, so that the use of the cardan shaft is more efficient.