Composition and lubrication of GICLZ drum gear coupling

Lubrication of GICLZ drum gear coupling:

If you are in the process of using GICLZ drum gear coupling, the lubrication effect of the coupling transmission parts can be done in the case of safe and reliable operation efficiency, but also can slow down wear. In the root bending strength and tooth surface contact strength sufficient conditions should have a larger degree of contact to determine the tooth width, should not blindly increase the tooth width, so as not to make the structure size unnecessary increase. The general tooth width coefficient is 8-14. The smaller tooth width should be determined by the allowable root stress and the required width of the displacement of the point of impact along the tooth width caused by the Angle between axes.

GICLZ drum gear coupling application:

GICLZ drum gear coupling made by machinery manufacturers is usually composed of the same number of teeth of the inner ring and flange half coupling with outer teeth and other parts. The outer teeth are divided into straight teeth and drum teeth two kinds of teeth, the so-called drum teeth is the outer teeth made into a sphere, the spherical center on the axis of the gear, the clearance of the tooth side is larger than the general gear, drum gear coupling can allow a larger angular displacement (relative to the straight tooth coupling), can _ tooth contact conditions, improve the ability to transfer torque, prolong the service life. Contact state along tooth width with angular displacement.

To sum up:

GICLZ drum gear coupling transmission efficiency is up to 99.7%. For the transmission efficiency of the coupling transmission parts, manufacturers in various regions have generally replaced the straight gear coupling with drum teeth. The coupling transmission parts produced by the machinery manufacturer are of variety specification _ and conform to the corresponding standards. And its rigidity, flexibility, no elasticity, so it is not suitable for vibration reduction, buffering and two axis in the strict requirements of the machinery.