GCLD type drum gear coupling tooth design 4 points suggestions

Preface:

The number of teeth and modulus of GCLD type drum gear coupling manufactured by machinery manufacturers determine the radial structure size of the coupling transmission parts. The important parameter of the coupling _ is the number of teeth and modulus, how to design the number of teeth and modulus? Many friends do not know, often according to experience and query manual to determine. For drum-tooth couplings that transmit torque, the diameter of the dividing circle can be determined by comparing with the relevant standards or the methods mentioned above.

For the tooth design of GCLD type drum gear coupling, here Xiaobian to give you a few suggestions:

1. For occasions where the load impact is not large, it is recommended to choose a smaller modulus under the premise of satisfying the bending strength, in order to facilitate the more compact structure, improve the vibration reduction capacity, and increase the stability and reliability of operation;

2. For harsh working conditions, it is recommended to use a larger modulus to increase the thickness of the tooth root and improve the impact resistance, but in this case, the effective tooth width should not be more than 4 times the thickness of the tooth root.

3. In order to facilitate production and manufacturing, the standard module series should be used as far as possible. The selection of fewer teeth is mainly considered from the processing side of the inner gear sleeve.

4. The number of teeth is often affected by the allowable deflection Angle and gear strength. The ratio between the width and the modulus should not be too large, and the impact overload capacity will tend to decrease with the increase of the number of teeth

To sum up:

The above is the mechanical manufacturers of GCLD type drum gear coupling in the design is very experienced, our manufacturers produced this coupling transmission parts is a variety of mechanical equipment will be used in a kind of parts. If you want to buy the coupling transmission parts of the user, you can come to the machinery manufacturer to buy.